Safesmiths Catalog Field reference · pilot

Sargent & Greenleaf 2740

  • Maker Sargent & Greenleaf
  • Families S&G Magic Module footprint (mounting-compatibility group)
  • Status active

Summary

Specifications

rating

GSA-approved 16 June 2010 under Federal Specification FF-L-2740 (Security Facts Issue 25).

DoD Lock Program Security Facts, Issue 25, March 2011 · NFESC · 2011

mounting

The retrofit kit supplies five 0.032 in. thick shims. The count placed between the lock bolt and the L-bracket is the number that fits between the anti-drive strike and plunger housing, less one.

Sargent and Greenleaf Model 2740 Overly Class 5 Escape Device Retrofit Instructions, 630-842, December 2011 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2011

Machine screws and nuts in the retrofit use a drop of Loctite 242 threadlocker. The L-bracket is fixed to the bolt end with two 10-32 screws, and the escape device with 8-32 screws.

Sargent and Greenleaf Model 2740 Overly Class 5 Escape Device Retrofit Instructions, 630-842, December 2011 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2011

Only two diagonal 1/4-20 screws are needed to hold the lock body to the door for the first fit check.

Sargent and Greenleaf Model 2740 Overly Class 5 Escape Device Retrofit Instructions, 630-842, December 2011 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2011

accessories

Fitting a 2740 to a door needs the 2740 setup module (S&G part 2740-200) to calibrate it after installation.

Sargent and Greenleaf Model 2740 Overly Class 5 Escape Device Retrofit Instructions, 630-842, December 2011 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2011

catalog date

2011-03

maintenance

FF-L-2740 / FF-L-2938 electromechanical combination locks (§5.1.2.2): operate lock including combination change per policy; check dial/dial-ring alignment and smooth operation; check for loose dial ring, spindle, or mount screws; replace damaged parts; lubricate only per manufacturer. Style 1: check LCD segments/cracks/error codes. Style 2: battery check / replace if appropriate.

FED-STD-809E, Inspection, Maintenance, Neutralization and Repair of GSA Approved Containers, Lock Extensions and Vault Doors, February 2023 · 2023

specifications

S&G Model 2740 GSA-approved 16 Jun 2010 to FF-L-2740. Bolt retracts flush; throw 0.461 in. for older GSA boltwork; bolt drilled/tapped for most bolt extensions. Single or dual-control modes (dual = two combinations). Magic Module footprint; Set-up Module for install/modes/service. Dialing L-R-L-R; powered by long-life lithium battery; change key included.

DoD Lock Program Security Facts, Issue 25, March 2011 · NFESC · 2011

supplied parts

Retrofit kit 2740-117 holds the parts needed to fit a 2740 lock to an Overly Class 5 red label vault door with an inside escape device. It does not include the lock, which is S&G part 2740-100.

Sargent and Greenleaf Model 2740 Overly Class 5 Escape Device Retrofit Instructions, 630-842, December 2011 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2011

notes

S&G warns that skipping the retrofit kit can lead to a vault lockout that the warranty does not cover. Internal lock parts need not be removed, only the cover.

Sargent and Greenleaf Model 2740 Overly Class 5 Escape Device Retrofit Instructions, 630-842, December 2011 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2011

Restricted

Drill points

Member content. 3 facts on file; 3 drill-plate points on file. The values are not shown here.

Bypass

Member content. 10 facts on file. The values are not shown here.

Neutralization

Member content. 3 facts on file. The values are not shown here.