Sargent & Greenleaf 6125 Comptronic
Summary
- rating: UL Listed Type 1; DNV 3492; A2P B/E; VdS Class 2; CEN B.
- lock dimensions: Case length is 3.320 in (84.3 mm), height 2.400 in (61.0 mm), and mounting hole spacing is 2.624 x 1.624 in…
- mounting: The mounting surface must be flat and smooth with 1/4-20 (M6) screw holes, and the wire channel (spindle…
- Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
- Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
Specifications
rating
UL Listed Type 1; DNV 3492; A2P B/E; VdS Class 2; CEN B.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
UL Listed Type 1; DNV 3492; RoHS compliant; A2P B/E; VdS Class 2; CEN B.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
lock dimensions
Case length is 3.320 in (84.3 mm), height 2.400 in (61.0 mm), and mounting hole spacing is 2.624 x 1.624 in (66.6 x 41.2 mm). The bolt is 1.000 in (25.4 mm) wide and 0.312 in (7.9 mm) thick, with side-view dimensions of 1.165 in (30 mm) and 0.281 in (7.1 mm).
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
mounting
The mounting surface must be flat and smooth with 1/4-20 (M6) screw holes, and the wire channel (spindle hole) must be at least 5/16 in (8 mm) across. Right-hand, left-hand, vertical-up and vertical-down mounting all work without changes.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
Only the supplied lock body screws should be used, engaging the mounting plate by at least four full threads and tightened to 30-40 in-lb (33.9-45.2 dNm). Lock washers and thread sealing compounds are not to be used.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
Keep at least 0.150 in (3.8 mm) between the bolt end of the lock case and the nearest blocking bar or cam plate. That part must not push the bolt in farther than the motor retracts it, or operation can become inconsistent.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
The microswitch must close only when at least 0.040 in (1 mm) of clearance exists for the bolt to extend fully. It should sit where it senses the cam plate or blocking bar that meets the bolt, and the boltwork must not stop against it.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
The 6100 series fits the same mounting screw locations and space as a standard S&G 6730 mechanical lock, and three 1/4-20 (M6) screws hold the lock body. The keypad is 4 in (101.6 mm) across, slightly larger than standard dial rings.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
accessories
6124 and 6125 Series page (rev 6/23/2014). Keypads (only): two-battery 61KP-105 satin chrome, not tamper indicating, maintains U.L. Listing; 61KP-202 satin chrome, tamper indicating, maintains all ratings.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
IP Series 101 keypad: monitors and controls from one to thousands of 6124/6125 locks from a central point over the intranet; LCD in English, Spanish, German, French, Italian or Portuguese.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
Electronic Lock Keypads page (rev 6/23/2014). Tamper-indicating keypad for 6124/6125 (VdS): 61KP-202 is the 2014 part number (part list + lock-body page); 61KP-201 is the 2001-era part number carried over in the 2014 description text (Q39). 61KP-105 (satin chrome) generally used with 6124-6129 (not tamper indicating).
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
Built-in password-protected web server to set, change or delete codes, time lock schedules and time delays, and to read the last ten audit events; optional LMP software (500-event audit) and ER exception reporter; static IP or reserved DHCP.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
Orders: 6160-300 keypad with external connection box and cables; 6160-200 keypad only; 6160-100 external connection kit; 6160-101/-102/-103 power supply (US/Europe/UK); 6160-400 LMP; 6160-410 ER.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
Compatible lock (not included): 6125-237 push-pull motor lock; supports multiple users, time delay, time delay override and duress. The 6125-237 is also listed elsewhere in the catalog as a multiple-user BPI lock body.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
bolt dimensions
Standard travel is 0.461 in (11.71 mm), with the bolt flush with the case when unlocked. Removing the travel screw and fitting the supplied 0.075 in (2 mm) spacer lets the bolt rest 0.08 in (2 mm) inside the case, for a throw of 0.54 in (13.71 mm).
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
The bolt has two M4-0.7 tapped holes on 15 mm (0.59 in) centers for attaching boltwork.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
catalog date
1998-09
drawing dimensions
Dimensions-6125, 6127, 6129 Series Case, as printed: case 3.320 (84,3 mm) x 2.400 (61,0 mm); holes 2.624 (66,6 mm) x 1.624 (41,2 mm); bolt 1.000 (25,4 mm); locked.461 (11,71 mm), unlocked.125 (3,18 mm); depth 1.165 (30 mm).
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
bolt.312 (7,9 mm),.281 (7,1 mm); two M4-.7 holes.59 (15 mm) apart in the bolt; Accommodates direct boltwork attachment, push/pull 2.24 lbs (10 N), maximum load 5.6 lbs (25 N).
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
Adjustable throw: standard locked 0.461, unlocked 0 (flush), throw 0.461 (11,71 mm); with the bolt travel screw removed unlocked -0.08 (-2 mm, recessed), throw 0.54 (13,71 mm); for more than.46 in travel remove the screw and add a.075 in (2 mm) spacer.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
User-supplied boltwork switch: min 30 VDC, min 50 mA, silver contacts, snap acting, lock bolt extends on contact closure, lever or roller actuator, min 50,000 cycles,.110 x.020 in (2.8 x.5 mm) quick connect tabs.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
Bolt (Q42, resolved): standard unlocked 0 (flush with case), locked.461 in, throw.461 in; with the travel screw removed unlocked -.08 in (recessed), throw.54 in, as in S&G 630-429 (6125 installation instructions); the drawing's unlocked.125 matches neither and is not recorded.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
feature function
The 6124 and 6125 closely resemble the 6123 but add a VdS Class 2 rating (accepted for most European containers). They run the same firmware; the 6125 has extra gearing so its bolt can push or pull more than 2 pounds of connected boltwork (a push/pull motor lock).
SAVTA Electronic Lock Guide, Part 2, Sargent & Greenleaf, May 2009 · 2009
Push/pull motor design: the bolt can push or pull more than 2 pounds of connected boltwork.
SAVTA Electronic Lock Guide, Part 2, Sargent & Greenleaf, May 2009 · 2009
The new Time Lock keypad is only available on 6124, 6125, 6126, 6127 and Z03 RotaryBolt locks.
SAVTA Electronic Lock Guide, Part 2, Sargent & Greenleaf, May 2009 · 2009
The two-battery 61KP keypad (rectangular buttons) works with every S&G electronic lock except Direct Drives, but usually appears only on the 6124/6125, 6126/6127 and 6128/6129. Z02 and Z03 Direct Drive solenoid locks pair only with Direct Drive keypads (yellow or blue tab).
SAVTA Electronic Lock Guide, Part 2, Sargent & Greenleaf, May 2009 · 2009
Models 6120 and 6123 Q&A, "Does the lock have a duress mode?": Duress use calls for lock model 6124, 6125, 6126, 6127, 6128, 6129 or 6150
Sargent and Greenleaf Electronic Safe Lock Guide, March 2011 · Sargent & Greenleaf, Inc. · 2011
Multiple-user mode: master code (cannot be deleted), supervisor code in PIN position 1, user codes in positions 2-9 (position 9 is the time delay override code when override is on); Time delay and opening window each settable 1-99 minutes.
Sargent & Greenleaf 6124 and 6125 multiple-user mode quick reference guide, document 630-764 revised 7/26/2010 · Sargent & Greenleaf, Inc. (Nicholasville, KY)
The Low-Profile keypad (black tab) does not work with Direct Drive locks or the 6126 through 6129 series.
SAVTA Electronic Lock Guide, Part 2, Sargent & Greenleaf, May 2009 · 2009
Management Reset Code (MRC) is 7 digits including a 0/1 pair pressed together; resetting with the MRC deletes the override, supervisor and user codes but keeps time delay, opening window, duress and access mode.
Sargent & Greenleaf 6124 and 6125 multiple-user mode quick reference guide, document 630-764 revised 7/26/2010 · Sargent & Greenleaf, Inc. (Nicholasville, KY)
the MRC can only be changed using the factory master code before it is first changed; Change from multiple-user to dual-user is non-reversible, must be done before the factory master code is first changed, and disables the MRC.
Sargent & Greenleaf 6124 and 6125 multiple-user mode quick reference guide, document 630-764 revised 7/26/2010 · Sargent & Greenleaf, Inc. (Nicholasville, KY)
The bolt is built to drive attached boltwork blocking devices: it moves a 2.25 lb (10 N) load, with an intermittent maximum of 5.5 lb (25 N). The load must move in line with the bolt, or performance suffers.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
lock options
6124 and 6125 Series page (rev 6/23/2014). Lock bodies (only): 6124-143 / 6125-138 multiple user, MRC yes (not available if switched to dual user), time delay 1-99 min, override yes, BPI no, duress yes (module 6102-090); 6124-238 / 6125-237 same with BPI yes. Locks come with both M6 and 1/4-20 mounting screws.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
power source
Two 9 V alkaline batteries are required and are not included. Use fresh batteries (Duracell is recommended), not old or partly drained ones.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
specifications
Electronic Lock Features Chart (rev 6/23/2014), column 6125 SERIES (multi-user mode and dual user mode columns): same marks as the 6124 columns: multi-user mode MRC, master, 1 supervisor, 7 users (3 when duress enabled), total 9**.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
6124 and 6125 Series page (rev 6/23/2014); printed features: motor-driven lock bolt; multiple user mode provides a management reset code, dual user mode does not.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
dual user mode master, 1 supervisor, 8 users, total 9; duress module 6102-090; time delay 1-99 min; time delay override code; penalty lockout; BPI order 6125-223 (multi-user column) / 6125-233 (dual user column); motor drive.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
Footnote *: total counts only codes that open the lock (not time delay override or programming/audit codes). **: with time delay override disabled an extra user code is available (max 9 user codes; 8 if override enabled), 3 available when duress is enabled.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
one master, one supervisor, seven user codes and one time delay override code (footnote: with duress enabled in multiple user mode, user PINs 4-8 are disabled; the override uses PIN 9, which acts as a user code if override is disabled).
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
multiple user mode switchable to manager/employee; dual user mode set permanently at setup before the master code is first changed, two codes within one minute; penalty time; time delay up to 99 minutes with one override code; duress via optional module 6102-090.
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
bolt position indicator on some models. 6125 Series: for direct boltwork attachment; pushes and pulls 2.24 lbs (10 newtons); maximum load 5.6 lbs (25 newtons).
Sargent and Greenleaf Product Catalog, July 2014 · Sargent and Greenleaf, Nicholasville, Kentucky · 2014
The cable (spindle) hole must be at least 0.312 in (7.9 mm) and no larger than 0.406 in (10.3 mm) in diameter.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
The bolt withstands at least 225 lb (1000 N) of end load, and the safe's boltwork must never apply more than 225 lb (1000 N) of side load to it.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
On a new set of batteries the lock is rated for about 5,000 operations when the time delay is not used.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
An external normally open boltwork microswitch, not included, tells the lock to extend the bolt. It should be rated at least 30 VDC and 50 mA, with silver snap-acting contacts, a lever or roller actuator, 50,000 cycles of life and 0.110 x 0.020 in quick-connect tabs.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
Auto-relocking square bolt body: the maker states that the motor itself relocks and deadlocks the bolt once the safe boltwork is extended, or on keypad input.
Sargent and Greenleaf Models 6124 and 6125 product page, sargentandgreenleaf.com, accessed 2026-10-25 (JS-rendered) · Sargent & Greenleaf (ASSA ABLOY) · 2026
Three operating modes: single control, dual control and manager/employee. Ten codes in total: one master, one supervisor and eight user.
Sargent and Greenleaf Models 6124 and 6125 product page, sargentandgreenleaf.com, accessed 2026-10-25 (JS-rendered) · Sargent & Greenleaf (ASSA ABLOY) · 2026
notes
6124-6129 and Z03 respond to the * 8 # test with a long steady error tone; then 4 3 * separates the models (see the 6120/6123 identification entry for the beep table).
SAVTA Electronic Lock Guide, Part 2, Sargent & Greenleaf, May 2009 · 2009
Not printed in the article: lockout after wrong entries, anti-manipulation, anti-autodialer, battery chemistry or external battery pack. (Drill points and opening methods are mentioned as differing by model but are not described.)
SAVTA Electronic Lock Guide, Part 2, Sargent & Greenleaf, May 2009 · 2009
Codes should avoid personal details like a birthday, house number or phone number, and anything easy to guess.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
The maker's warranty and EN1300 compliance both depend on following the installation requirements in the sheet.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
Modifying the lock, including adding bolt attachments, is not recommended and voids the warranty.
Sargent and Greenleaf Model 6125 Installation Instructions, 630-429, November 2009 · Sargent & Greenleaf, Inc., Nicholasville, Kentucky · 2009
Restricted
Drill points
Member content. 1 fact on file. The values are not shown here.