Safesmiths Catalog Field reference · pilot

Sargent & Greenleaf 6600 series

Summary

Specifications

rating

Preface: GSA-listed Group 1 and Group 1R combination locks; the only combination locks authorized; for GSA Approved Security Containers; under EO 12958, DoD ISPR 5200.1-R, and Army regulations

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

Group 1 vs Group 1R (MIL-HDBK-1013/8 §2.1.1): meet MIL-L-15596 Series. Group 1 = brass wheels; Group 1R = X-ray-proof (Delrin) wheels. Each has a thermal relock device against forced entry with thermal devices. These locks, and S&G R6700 Series (Group 2), have a special relocking trigger against spindle punching — attempted penetration by those means automatically deadlocks the unit.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

relocker present

Thermal relock device present (Group 1/1R). Special relocking trigger against spindle punch (also on R6700 Group 2).

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

specifications

Three versions share the 6600 Series name: (1) early-1950s hand-change (often front-reading dial; spy-proof dial/ring exists); (2) late-1960s hand-change for Hillside/Art Metal Class 6 containers — both obsolete, no spare parts from S&G.

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

Mounted combination locks: dial ring and dial on front of door/drawer head between dial and lock case; bolt projects from case. Available with front-reading dial or top-reading (spy-proof) dial — top-reading lets only the person dialing see the numbers.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

1980–81 S&G 6600 series key-change version (distinct from 1950s/60s hand-change Group 1/1R): UL originally certified Group 1 but uses a drop lever with roller bearing in the nose (not the classic split drive cam / arrow-knob anti-manipulation of earlier 6600). May be found on safes/chests/cabinets as last-resort per AR 380-5 ¶5-102 along with Diebold 180 and Yale OC5.

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

(3) 1980–81 key-change version (different design) originally UL Group 1/1R by wheel material but government tests concluded it should not be considered Group 1 — see Section 2; Section 1 data applies only to 1950 and 1960 hand-change versions.

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

notes

Combination selection guidelines (§2): on a mounted three-wheel lock there are 1,000,000 possible combinations (padlocks up to ~125,000) but not all valid. Guidelines include: no two numbers closer than exactly five digits (or multiples of ten); third number not 0–20 or 85–100; avoid straight ascending/descending; not all even/odd; never use 50-25-50 (factory sequence) on a container holding classified material. Never close door/drawer after setting a new combination until it is worked at least three times and recorded per security directives.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

Replacement notice: 1980s S&G 6600 series key-change combination locks, and the LaGard locks referenced, may not replace locks on GSA approved security containers, and any already installed should be replaced. They were proven susceptible to manipulation despite UL group labels.

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

Template outer size 3.08×3.50 in.; mounts with 8-32 dial-ring screws; Bullet II base attaches with 8-32 rig screws.

Lockmasters template instruction sheets and packages (2026-10-19) · LOCKMASTERS INCORPORATED

This handbook's wording is correct in its own context: the standard defines what qualifies, and the spy-proof dials that qualified were top-reading. Spy-proof generally is not limited to top-reading; top-reading is one way to achieve it, not a synonym.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

Restricted

Drill points

Member content. 1 fact on file; 2 drill-plate points on file. The values are not shown here.