Safesmiths Catalog Field reference · pilot

Sargent & Greenleaf 6735

Summary

No headline specifications are on file for this model yet.

Specifications

bolt dimensions

Mounting step 1 (standard 3-wheel and 4-wheel Group 2 and 2M locks; the sheet names only the 6735): pull the bolt by hand to full extension, where it sticks out roughly 1/2 in from the case.

Sargent and Greenleaf Group 2 and 2M Combination Lock Mounting Instructions, 630-738, March 2006 · Sargent and Greenleaf · 2006

catalog date

1962-10

feature function

Handling setup (R6730 and 6735, 8550 and 8560 and 8565MP): This design uses the S&G 4 way drive cam. The 4 hand positions (Right Hand, Left Hand, Vertical Up, Vertical Down) are produced by 4 spline key ways inside the drive cam, or 2 spline key ways on that cam as well as the spindle

Sargent and Greenleaf Adjusta-Loc Installation Instructions, 630-150 Rev. 11/88 · Sargent & Greenleaf

specifications

Pull the bolt out by hand until fully extended; it then sticks out roughly 1/2 in from the lock case.

Sargent and Greenleaf Mechanical Safe Lock Guide, December 2009 · Sargent & Greenleaf, Inc. · 2009

Glossary: three-wheel lock — third wheel always adjacent to the drive cam; key-change wheels; torque adjuster or tension washer on the wheel pack; relock trigger defined.

Sargent and Greenleaf Mechanical Safe Lock Guide, December 2009 · Sargent & Greenleaf, Inc. · 2009

6730/6735/6738/6741 install (public): tube (when present) surrounds and protects the spindle from door insulation; seat Delrin bushing into dial ring; for 6735 — mark tube 7/64 in out from front surface of safe door, cut tube at mark, clear debris.

Sargent and Greenleaf Mechanical Safe Lock Guide, December 2009 · Sargent & Greenleaf, Inc. · 2009

Step applying only to the 6735: Applies only to the 6735 with an aluminum spindle tube: mark the tube 7/64" out from the front surface of the safe door

Sargent and Greenleaf Group 2 and 2M Combination Lock Mounting Instructions, 630-738, March 2006 · Sargent and Greenleaf · 2006

Step 5 and 6 (series statement): Fasten the lock to the safe's mounting plate with a 1/4 x 20 machine screw at each corner of the lock case; then fit the dial ring to the front of the door with two 8-32 machine screws

Sargent and Greenleaf Group 2 and 2M Combination Lock Mounting Instructions, 630-738, March 2006 · Sargent and Greenleaf · 2006

Spindle: thread into drive cam until dial snug against dial-ring post, mark where spindle first projects, cut at mark, file flat; align spline keyway; insert new unused spline key with flag toward spindle end.

Sargent and Greenleaf Mechanical Safe Lock Guide, December 2009 · Sargent & Greenleaf, Inc. · 2009

Glossary: a lever lock; the lever's fence drops into the wheel gates so its nose can engage the drive cam gate (not direct entry).

Sargent and Greenleaf Mechanical Safe Lock Guide, December 2009 · Sargent & Greenleaf, Inc. · 2009

notes

Electronic/keypad topics (lockout, wrong entries, battery, external pack, anti-manipulation, anti-autodialer): not printed; this is a mechanical dial lock sheet; Maker line on the sheet: Sargent & Greenleaf, Inc., Nicholasville KY, and Sargent & Greenleaf S.A., Ecublens, Switzerland.

Operating Instructions for 6600/6700 Series Three Number Combination Locks, June 2004 · Sargent & Greenleaf, Inc. · 2004

Cover: operating instructions for the right-hand 3-number combination lock, Sargeant & Greenleaf models R-6720, R-6725, R-6730 and R-6735 (name spelled 'Sargeant' on the sheet); printed for Chubb-Mosler and Taylor Safes Ltd., Brampton, Ontario, with offices in Quebec City, Montreal, Toronto, Winnipeg, Saskatoon, Calgary and Vancouver; form F.3005 Rev. 10/62.

Operating Instructions for Right Hand 3-Number Combination Locks R-6720/R-6725/R-6730/R-6735, October 1962 · SARGEANT & GREENLEAF INC. · 1962

General information: fits the standard dial (Figure 1) or the 'Counter-Spy' dial (Figure 2); the steps apply to both; opening index at the top of the dial ring; CHANGING INDEX to the left of the opening index.

Operating Instructions for Right Hand 3-Number Combination Locks R-6720/R-6725/R-6730/R-6735, October 1962 · SARGEANT & GREENLEAF INC. · 1962

Electronic/keypad topics (lockout, wrong entries, battery, external pack, anti-manipulation, anti-autodialer): not printed; mechanical dial lock sheet. The 'Counter-Spy' dial is named in Figure 2; no spy-proofing specification is printed.

Operating Instructions for Right Hand 3-Number Combination Locks R-6720/R-6725/R-6730/R-6735, October 1962 · SARGEANT & GREENLEAF INC. · 1962

6735 only: aluminum spindle tube — insert through spindle hole, mark tube 7/64" out from the front surface of the safe door, cut straight and smooth.

Sargent and Greenleaf Mechanical Safe Lock Guide, December 2009 · Sargent & Greenleaf, Inc. · 2009

Electronic/keypad topics: not printed (mechanical dial lock guide).

Sargent and Greenleaf Mechanical Safe Lock Guide, December 2009 · Sargent & Greenleaf, Inc. · 2009

Glossary (Mechanical Guide): tube surrounds/protects spindle from insulation; Group rating indicated as Group 1, Group 1R, or Group 2; spline key ties spindle to drive cam; 8550 MP cam and lever/accelerator assembly called out for MP variants.

Sargent and Greenleaf Mechanical Safe Lock Guide, December 2009 · Sargent & Greenleaf, Inc. · 2009

(The sources manifest labelled the sheet Mas-Hamilton/La Gard/Kaba Mas; the page prints S&G.).

Operating Instructions for 6600/6700 Series Three Number Combination Locks, June 2004 · Sargent & Greenleaf, Inc. · 2004

Turn slowly and steadily; overshooting a number means redialing the whole series, never reversing; each alignment with the opening index counts as one revolution.

Operating Instructions for Right Hand 3-Number Combination Locks R-6720/R-6725/R-6730/R-6735, October 1962 · SARGEANT & GREENLEAF INC. · 1962

Restricted

Opening

Member content. 19 facts on file. The values are not shown here.