Safesmiths Catalog Field reference · pilot

Sargent & Greenleaf 8400

Summary

Specifications

rating

S&G 8400 Series: key-change mounted lock, Group 1R; NSN 5340-00-264-7592.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

Preface: GSA-listed Group 1 and Group 1R combination locks; the only combination locks authorized; for GSA Approved Security Containers; under EO 12958, DoD ISPR 5200.1-R, and Army regulations

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

Group 1 vs Group 1R (MIL-HDBK-1013/8 §2.1.1): meet MIL-L-15596 Series. Group 1 = brass wheels; Group 1R = X-ray-proof (Delrin) wheels. Each has a thermal relock device against forced entry with thermal devices. These locks, and S&G R6700 Series (Group 2), have a special relocking trigger against spindle punching — attempted penetration by those means automatically deadlocks the unit.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

locking system

Identification: the S&G 8400 series dial has a butterfly center.

The National Safecracker - Meilink Fire Safes Part 4 - Summer 2019 · 2019

catalog date

1989-12

relocker present

Thermal relock device present (Group 1/1R). Special relocking trigger against spindle punch (also on R6700 Group 2).

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

Internal relocking trigger (spring-energized pin) present on the S&G 8400 discussed in NL Feb 1998 Diebold GSA column.

The National Locksmith, February 1998 · National Publishing Co., Streamwood, Illinois · 1998

specifications

Mounted combination locks: dial ring and dial on front of door/drawer head between dial and lock case; bolt projects from case. Available with front-reading dial or top-reading (spy-proof) dial — top-reading lets only the person dialing see the numbers.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

S&G 8400 Series (Figure 4): components labeled include change index, dial & dial ring, wheel pack, inner spindle, spline key, cam, back cover plate, drop lever, and thermal relocker.

Intelligence Materiel Division Technical Data Handbook No. 2, Combination Locks, September 1997 · 1997

8400 Series (§3.2.2): universal centi-spline dial — removable spindle positionable to any of 100 settings matching dial graduations (any hand). Optional metal tube secured to lock case aligns dial-ring index and protects spindle from door insulation. Some models have torque adjustment on the wheel pack against vibration/'walking'.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

Tube cut residual: leave 1/16 in (2 mm) above tube nut. Spindle cut residual: leave 1/16 in (2 mm) above wheel post. Lubricant: GE G-322L only (no oil/petroleum).

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

Old-style S&G 8400: the usual three-wheel 6730-series change key does NOT fit. Use the S&G 8400 key (U12 can stand in).

The National Locksmith, February 1998 · National Publishing Co., Streamwood, Illinois · 1998

Reader tip (NL Oct 1998): when stocking an S&G 8400 series lock, order a Centi-Spline dial — spindle removable from dial and positionable for desired hand of lock.

The National Locksmith, October 1998 · National Publishing Co., Streamwood, Illinois · 1998

To open: dial the combination as usual, return the dial to ZERO, then hold the outer dial and rotate the inner spindle to move the slide.

The National Locksmith, February 1998 · National Publishing Co., Streamwood, Illinois · 1998

Later versions use a U8 change key and show a recess around the keyhole.

The National Locksmith, February 1998 · National Publishing Co., Streamwood, Illinois · 1998

notes

Combination selection guidelines (§2): on a mounted three-wheel lock there are 1,000,000 possible combinations (padlocks up to ~125,000) but not all valid. Guidelines include: no two numbers closer than exactly five digits (or multiples of ten); third number not 0–20 or 85–100; avoid straight ascending/descending; not all even/odd; never use 50-25-50 (factory sequence) on a container holding classified material. Never close door/drawer after setting a new combination until it is worked at least three times and recorded per security directives.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

S&G 8400 RH in Norfolk GSA file; ~16" spindle; ink-filled shroud.

10 Years of Dave McOmie, The National Locksmith, 1997 · National Publishing Company, Streamwood, Illinois · 1997

Meilink short double-door stock with 8400 (butterfly dial center).

The National Safecracker - Meilink Fire Safes Part 4 - Summer 2019 · 2019

Template outer size 3.08×3.50 in; mounts with 8-32 dial-ring screws; Bullet II base attaches with 8-32 rig screws.

Lockmasters template instruction sheets and packages (2026-10-19) · LOCKMASTERS INCORPORATED

This handbook's wording is correct in its own context: the standard defines what qualifies, and the spy-proof dials that qualified were top-reading. Spy-proof generally is not limited to top-reading; top-reading is one way to achieve it, not a synonym.

MIL-HDBK-1013/8 Combination Locks, December 1989 · 1989

Restricted

Drill points

Member content. 2 facts on file; 7 drill-plate points on file. The values are not shown here.

Opening

Member content. 3 facts on file. The values are not shown here.

Relocker location

Member content. 1 fact on file. The values are not shown here.